Original Prusa XL 5-Toolhead Multi-Material Large-Format CoreXY 3D Printer

Outstanding printer! Great quality. Prusa Connect makes it so easy to use and watch if you add the buddy camera.Make sure you connect everything to the same network.

Stay Away from Prusa PrintersPrusa printers are inferior to almost every other 3D printer manufacturer today. The only reason I purchased one was because of its size (XL). However, this printer is deeply disappointing.Assembly IssuesFirst and foremost, the product is misleading and untruthful in its presentation. While the printer body comes assembled, the extruder does not. In short, it’s not ready to print out of the box!You’ll need at least half a day to tinker with and install the “Nextruder” heads. The more extruder heads you have, the longer it will take—obviously.Their documentation is

The printer itself is great. The delivery, well that is another thing. Prusa ships a big bag of gummies bears with the printer, and they were everywhere. Looking in the box at the parts everything looked ok, until I had everything out. Then I noticed several plastic part were broken. Now these are able to be printed, you can find them on printables. Now I have to take about half of a day to print repair part for a brand new printer, luckily I have other printers.

Arrived a day early and much easier purchase than going through the hassles of importing from Czech Republic. Everything post assembly was in working order and the printer is fulfilling its expectations. Please note that this is not a novice device nor is it an easy machine to comprehend - recommend for advanced 3D enthusiasts who are able to take things apart and are not afraid of troubleshooting. Overall satisfied for the modest couple of months since I got it.

I really want to love this printer but can't. The 5 tool heads are great for multimaterial printing when it works but sadly it's out of commission every few days. I ultimately returned mine because I was spending more time repairing the printer than using it. I own 8 other 3D printers, across 3 different brands. This is my most expensive 3D printer by 3x the cost of the next most expensive one, and less reliable than my $500 machine.To start it's not fully assembled, it's mostly assembled. You're going to have to do a few hours of doing the final assembly. One of my tool's thermristers was def

The machine itself is awesome, but Amazon damaged it in shipping. I printed parts and fixed it myself. This is my second XL 5T, and it’s still the best multi color consumer printer on the market.

So I assumed all the parts would fit perfectly, the screw and this nut for the filament holders did not work. I had to buy screws from Home Depot kind of disappointing.I haven’t printed yet as I just built it, this part made me waste around an hour to see if I was following the instructions incorrectly but it was just bad parts.I’ll update my review once I print or get information regarding this.

Hi I have some issues with the heads one needs to be fixed or replaced as it won’t feed and comes up with puppy issues. The other issue I have is half way a print it parks and says reload filaments.