DSYJ-D0000101 Micro USB Host OTG Cable with Micro USB Power for Nexus 4 Nexus 7 Galaxy S Iii & Galaxy Nexus 0.65ft 1Pcs Black

I bought this to try to get a boot-looping Firestick to break out of it. This Firestick was beyond help. However, this cable does work with another Firestick as expected. I was able to hook a keyboard to it with this cable. This tells me the cable works but that one Firestick was toast.

I used this cable to playback movies stored on a Sandisk Cruzer USB flash drive. In combination with the Nexus Media Importer software from the Google Play Store, all I had to do was plug the OTG cable into my Nexus 7 and my movies were automatically displayed for playback. I used my Nexus 7 to watch movies during a 10 hour flight to Italy and this OTG cable made watching movies very fast and very simple. Video playback was smooth and reliable and I was able to carry many more movies with me on an external flash drive than would fit on the internal Nexus 7 flash storage. The SanDisk Cruzer fit

Great Gadget! You get what you pay for however. I paid under $2,from "Eamall". The connector going to phone is rather loose, could be because i have used my phone so much. The power and accessory port are very snug. You must use your power supply cable with this, at least on a Vzw Galaxy S3. I made sure I used a high power charger. I prefer the Note3 charger I have, which is 2000ma or 2a. I have read allot about shorting out the usb port, unless you use the power cord. Average usb devices use 500ma power and having a 1.5a or 2a, allows the device or devices to be powered as well as the phone.

Not 100% as pictured, but does what I wanted it to do. The version I received does not have the extra lip on the female microUSB. HOWEVER, it did come molded with a loop for lanyard or thin key ring. Very convenient strain relief if your power bar (brick, block, bank) comes with a keychain lanyard.I wanted to expand my tablet as an outdoor computer. As well as utilize a charging bar or similar USB 5V on the microUSB female leg. It is a little finicky with the setup depending on what main device you attach to it, as a phone I tried did not sense the charging bar unless piped through the regular

They worked great with the raspberry pi I got them for

I primarily purchased this cable for the USB OTG adapter function and that part works GREAT with my phone (an LG Stylo 3); however, the additional charging port will NOT charge my phone. That is a disappointment but since I purchased it primarily for the USB OTG function, I decided to keep it. The overall quality of the cable seems fine but it would have been nice if the charging port worked because I'm recording audio from a USB audio interface via the USB OTG part of this cable and that can be a steady, fairly high drain on my phone's battery. On the bright side though...if you have always w

I just got this little guy, relatively recently, and have only tested a couple things a couple times, so I can't really attest to it's build quality/longevity. That being said, in my short testing, it seems to work as perfectly as it can, as far as I can tell. Cheapy sd card reader with 32gb micro sd card? System sees it, without any coercing. Astro does not, but I think that's a problem of permissions. Copying files to the device ended up being a little fiddly, but not too much.As for my other use, so far... ehh. I can get my Audio Technica AT2005USB recognized and working in Evernote, and wo

I used this with a Hisense Sero 7 Pro, It has a custom ROM and kernel so it has the ability to take advantage of this cable. Using this cable I can charge my device and run anything from the USB port on the cable.This cable works perfectly.Now I have to say that when using this plugged into my device it only charges at 900ma. This is not the fault of the cable but due to a limitation of the kernel on my device. When it see's something plugged into the USB it automatically limits what the device see's and sends the rest to what ever is plugged into the USB port. If I only use the pass thru on t