ASUS PRIME H610I-PLUS D4 LGA 1700(Intel 12th Gen&Intel vPro)mini ITX Motherboard(PCIe 4.0,DDR4,USB 3.2 Gen 1 Type-A,1Gb Lan,DP/HDMI/D-Sub,V-M.2(Key E),Q-LED,Mono-out header with amp IC,SPI TPM header)

Good, basic, inexpensive motherboard for 12th-14th gen Intel socket 1700 CPUs.Works great with my i5-12400F and related RAM and parts. PC3200 RAM is the maximum this chipset supports (a function of the chipset, not something Asus can control). The motherboard cannot overclock RAM or CPU (again, a function of the chipset; not something Asus can control).The instructions are clear, everything booted up and worked on the first try, and the board has been absolutely reliable in near-daily use. If you need a cheap ITX board for a non-overclocking CPU with DDR4, this is a great choice.The BIOS suppo

I purchased this mITX motherboard to install in my 2012-made Lian Li PC-CK101 Train PC case.Installation has been expectedly challenging in such a cramped case. The motherboard is installed in the steam locomotive's water tanker, with power cables leading to the locomotive itself. This board has been 100% functional. Everything, including the front panel USB slots, have worked! What I especially liked about this installation is that, the PC's existing 300-W SFX power supply is still usable! Of course, that depends on the CPU and any graphics. I'm running an i5 12600 with inbuilt graphics, alon

Maybe I don’t need to knock a star off for this, but the included SATA cables were interesting. There’s a 90 degree one for, I assume like usual, connecting to the motherboard. But the SATA port is backwards and it covers the RAM slots.I’ll update if I come across more pressing issues.

Built a compact system with this board and it’s handled everything I’ve thrown at it. BIOS is straightforward, POST times are quick, and the layout is sensible for the limited ITX space. VRM temps stay reasonable even with my 12700K. It’s not feature-packed like higher-end boards, but for the price point it delivers stable performance. The DDR4 support was perfect since I already had RAM on hand. Good choice if you’re doing a small form factor build without needing tons of PCIe slots or overclocking features

EDIT: Attempted install of this motherboard. This CANNOT be used with non OEM heatsinks as the motherboard does violates ATX standards by placing VRM components where the heatsink bracket should go. This is a critical design defficiency and should be pulled from the market.

I have it running a filemaker server locally hosted. It hums along 24/7. I cannot find fault for the price!

Do yourself a favor and just buy a little more expensive one that comes with wifi. Having to add the wifi card and antenna will cost you $30-40 more anyways. If in fact you get a board that works well! I been building pc's since the late 90's and this mobo immediately locked up after a few hours of being on. The CPU and ram I used was fine because I just put it in another system and had no issues. I tried an upgraded BIOS etc. Still had the lockups. I even turned off XMP profile and ran everything at default. Still had an issue. This is with all the correct drivers etc. In the end trying to sa

Fast delivery,good packing, good condition.