JC TECH(UL-Listed) 12V 1 AMP Power Adapter LED Power Supply 110V AC to 12V DC Transformer Lighting Power Adapter for LED Strip Lights, IP Phone, CCTV Camera, and Low Voltage Devices| 5 Pack - Black

I thought this lot of 5 was a good value. Even though they're advertised as 1 amp., mine were marked "1.25 amps". I did do some constant current testing. Up to and at 100 ma, the voltage was constant at about 12.1 VDC. As I increased the load up to 1.25 amps, the voltage dropped a few tenths ending up at 11.6 VDC at 1.25 amps. Pretty good regulation over a large current range. Although most of the projects I build require 5 VDC, there is some hardware, like some LED strips, that require 12 VDC. Also, I have started using these supplies even with projects that require 5 VDC. To use them, the pr

Work well with the device

These are great for the money. I really enjoy the orientation of the prongs to the body of the device. Perfect for what I need.

This five-pack of 1 Amp adapters seems to be a good buy, and their "90-degree" design allows them to be plugged side-by-side into duplex wall outlets or normally-spaced outlet strips. When I "bench tested" the five units on 110V AC input, I found that their no-load outputs were between 11.98 and 12.00 Vdc (they are rated for 12Vdc @ 1 Amp output); I have load devices that are 400mA (0.4 Amp) each. The output voltages of the adapters dropped to 11.92-11.94 Vdc with one load device (0.4 Amp) connected, and to 11.85-11.88 Vdc with two load devices (0.8 Amp) connected. I did not try the adapters w

They shipped the wrong item. The order was for 12vdc 1a power supplies. I received 12vdc 2a supplies. Luckily it worked for my project.

I have some light stips that took some time to put up. well, 3 of 10 of them went out because the power supply failed. I cracked open the power suppy using a vice, mostly because it was cool to do that, but also to see what was inside that failed, shure enough black blown components. Ok, so after that useless sentence, what can I say about this product? I spliced in my wires from the old powersupply and the lights lit right up. The powersupplies seam robust enought and i have 2 left over now. Bonus.NOTE: When you buy this product you need to make sure of the following. 1. The voltage must be t

I had a frequency counter project that needed a 12volt DC supply. I selected this supply right away because it had an Underwriters Laboratory (UL) listing which helped me feel safe about the product and the 5-pack deal was terrific since I knew I would need a power supply for other projects in the future. And, the price was right! I have used this supply for testing for several weeks now and it works perfectly!I highly recommend this brand and I would buy it again.

I have bought a lot of these for my illuminated glass art and have only just this week have one stop working. I have some that have been working constant now for several years powering art glass. So far they have been pretty darn good. These pieces stay lit 24/7