Best Power Tool Combo Kits in 2026: Cordless Drill, Impact and Saw Sets Ranked by Owners

Craftsman’s V20 seven-tool kit is the sensible answer for a homeowner who wants the core tools without paying DeWalt money. The half-inch drill makes 280 unit watts out with a two-speed gearbox, the quarter-inch impact driver produces 1,460 inch-pounds of torque, the six-and-a-half inch circular saw spins at 4,200 rpm with a tool-free bevel and spindle lock, and the reciprocating saw has a full one-inch stroke at 3,000 strokes per minute with tool-free blade release. Two batteries and a charger come in the bag. Over a thousand owners rate it strongly, praising the drill and impact in particular and noting the circular saw wants a sharper blade than the one supplied. Craftsman is owned by the same company as DeWalt, which shows in the ergonomics, though the V20 bare-tool catalog is smaller. For a first cordless platform in a house that needs decks fixed and shelves hung, it is the best money-to-tools ratio here.

The Black+Decker Matrix takes a different approach: one 20V MAX motor base and six snap-on heads, including a drill/driver, a detail sander, a jig saw, an oscillating tool and an impact driver, all stored in a case smaller than most single drills. Thousands of owners have reviewed it, more than any other kit here, and the rating is strong; the praise comes from apartment dwellers, first-home buyers and people who wanted one box that does everything for furniture assembly, picture hanging and small repairs. The honest limits are that a single motor means you cannot leave the drill set up while you sand, and each head has less power than a dedicated tool, so it is not the kit for building a deck. For light household use it is unbeatable value, and the 20V battery holds a charge for up to eighteen months in a drawer.

The Porter-Cable PCCK6118 is the kit for someone who wants the jigsaw and the sander as well as the core four. Eight tools come in the bag: a half-inch two-speed drill, a quarter-inch impact driver with 1,450 inch-pounds of torque and a quick-release chuck, a five-and-a-half inch circular saw with a 50-degree bevel, a variable-speed reciprocating saw, a jigsaw, a sander, an oscillating tool and a flashlight, plus two batteries. Over a thousand owners rate it strongly and describe it as a trim carpenter’s starter set. The circular saw is the smaller five-and-a-half inch size, which handles plywood and two-by lumber but is limited on bevel depth, and the larger concern is the platform: Porter-Cable has trimmed its cordless line, so there are fewer bare tools to add later than with DeWalt or Craftsman. As a complete set to keep in a van or garage, it is still a strong buy.

The DCK661D1M1 is the DeWalt kit for someone who does not need a speaker, a light or a right-angle drill but does want a grinder. The six tools are the DCD771 drill, the compact impact driver, the DCS381 reciprocating saw with a keyless clamp, the DCS393 six-and-a-half inch circular saw, an oscillating multi-tool and the DCG412 four-and-a-half inch grinder that spins to 8,000 rpm for cutting rebar and grinding welds. The battery mix is the useful difference from the 9-tool kit: one 2Ah and one 4Ah, so the saw and grinder get the bigger pack. Nearly a thousand owners rate it excellently. It costs almost as much as the nine-tool kit, so compare the two on the day; if the three extra tools in the DCK940D2 are things you will never use, this is the tighter set, and the 4Ah battery is worth having.

The DCK300P1 is not a starter kit; it is the second kit a DeWalt owner buys. It bundles the three woodworking tools the core combos leave out, all in brushless XR form: the DCW210 five-inch random orbit sander with variable speed from 8,000 to 12,000 orbits a minute and a low profile for control, the DCS356 oscillating multi-tool with three speeds and a wrench-free Quick-Change blade system, and the DCS334 jigsaw with an all-metal keyless bevel shoe that clicks to 0, 15, 30 and 45 degrees. A single 5Ah XR battery and charger complete it. A few hundred owners give it the best rating on this page, and the praise is for tools that feel a class above the brushed versions in the big kits. If you have a drill and impact already and are building furniture or finishing trim, it is the kit to add.

The DCK202P1 is the smaller sibling of the woodworking kit above: the same brushless five-inch random orbit sander and the same DCS356 oscillating multi-tool with its Dual-Grip variable-speed trigger, three-speed selector and wrench-free blade changes, this time with a universal adapter that accepts most other brands of blades. The extra in this box is the charger, an eight-amp fast charger that fills the included 5Ah XR battery at twice the rate of DeWalt’s standard unit. Hundreds of owners rate it excellently, and many bought it specifically for drywall repair and flooring, where the multi-tool does the cutting and the sander the finishing. Compare the price with the three-tool DCK300P1 before buying; the jigsaw it adds is worth a modest premium for most woodworkers, but if you have a jigsaw already, this pair with the fast charger is the better deal.

The Bosch GXL12V-270B22 is for the cabinet installer, electrician or remodeler who works in tight spaces and values weight over raw power. The GSR12V-300FC Flexiclick drill weighs 1.2 pounds bare yet makes 300 inch-pounds of torque, and it comes with four snap-on heads: a locking bit holder, a half-inch keyless chuck, a right-angle head and an offset head that drives screws a finger-width from a wall. The Starlock oscillating tool uses the Bosch 3-D blade interface for better grip and torque transfer than a flat mount. Two 2Ah batteries, a charger and a three-year warranty come in the box, and a few hundred owners rate it strongly. It is a 12V kit, so it is not the one for sinking lag bolts or building a fence, and there is no saw; it is here because for finish work and installations nothing in the 18V kits is as nimble.