EVERSECU 4K CCTV Power Supply 16 Channel Adjustable DC11V ~DC15V 32 Amp Output Reset Fuse with Anti-Ripple and Anti-EMI Interference Circuit Designed for 4K IP/CCTV Security Cameras System

This is a sturdy, good looking, and strong power supply. I replaced a power supply for my security cameras with this one. 15 cameras are connected. Wiring was simple -- there are 3 x knockouts on side of box depending on the wires you want to run in. The connecters are phillips head and have a built-in washer-like connection that maximizes surface area contact. The device runs quiet and cool. My only "wish" is that it came with rubber grommets for around the knockouts.

This is a great power supply. If you are looking for something to power a CCTV network, along with other items (requiring 11-15 VDC: <2AMPs) then look no further. This 16 Channel Power Supply had everything I was looking for in a power supply for my CCTV and house Data Distribution. After having several external power supplies fail, and the poor picture quality (esp at night) on my cameras, I was ready to invest in something better. This is filtered and clean power, free of magnetic interference. It also provides for over-current/surge protection and with PTC fuses, say goodbye to glass fuses

I had been using power bricks with a 4-way splitter to power 15 cameras. There were power problems and bad camera images. I divided the load between 6 power supplies for the15 cameras. Still had problems.Problem solved. I installed male DC 2.1mm x 5.5mm Wire Power Pigtails Adapter Barrel Plug Sockets to the 16 power supply outlets with sufficient length to reach the camera power cables. Mounted the power supply and connected 15 cameras. My power problems with the cameras went away. I have very clear images on all the cameras. Also, I had a 150-foot cable run to two cameras. This power supply a

Received this power supply today and it for a pack of 3was well packed by the factory. Easy installation on our 12 camera CCTV home system. Like others have said only issue is they "should" include the rubber grommets for the three side knockouts which were $2.52 at Home Depot for the pack of three! For those that want to be prepared they are 3/4" grommets to fit the 3/4" holes which Rufus did not know, now maybe he does!

After reviewing different brands and models, I settled for this one for a number of reasons. Price was great for what you get, and you get a total of 30amps. plus, a full 2-amps, with adjustable voltage for each channel.It has advanced Anti-Ripple and Anti-EMI Interference technology, which reduces camera interference. No more worrying about fuses because it has independent PTC fuses which automatically reset. Now I can power all my cameras and two DVRs. and no more DC 12V Power Supply units taking up lots of space. My cameras work better. No far so good.

Through the years adding cameras their power need have risen. This unit has 30 Amps total and being able to adjust voltage per channel is a big plus. Just finished installing it all is working great.

Bought this for some access control products. Individual voltage regulators on each channel were needed due to the length and gauge of the runs to the far side of a building. This worked like a charm as there was a 2v voltage drop (about 175ft of 18g) for the run. The voltage regulators go up to 14.7 volts on each channels for reference.Highly recommend.

Very nicely engineered. I have no complaints or suggestions for improvement. I’d be happy to recommend to anyone with the skills to wire it to cameras.