Yakry RV Backup Camera Plug and Play - No Delays 7" HD 1080P Reverse Camera

I purchased this system for my truck and travel trailer. The system is super easy to setup and I love the 12v plug. I didn't have to dig into the wires on my truck, just plug in the system. The power runs through the cable so finding power for the rear trailer camera is not needed like my old system. I didn't have to root out my trailer wiring to power the system. This setup doesn't use AVI cables which I never cared for. It comes with 4 pin connectors that fit snug together with a lock ring on them. Won't rattle loose or gather dirt . The monitor has a very sharp and crisp picture with many a

I bought this for my 2008 Ford Escape. It was installed in less than 2 hours and has been working great since.A few things to note. Test everything before you do the install.This is designed to attach to license plate mounts. On my Escape the license plate is on the hatch, so I chose not to mount there just because running the wires was slightly more difficult than I wanted to handle. Instead I mounted it to the bumper. I drilled 3 holes in total. 2 were 1/8 inch holes for the camera bracket itself and one was 1/2 inch for the cable from the camera to the power and screen. I also used marine g

I'm using this with an extension cable to see behind my 22' boat when I trailer it. So far works great. Will be headed on a long trip with the boat in a week and I'll update if anything changes. Was super easy to install, provides nice picture quality. The kit comes with a lot of flexibility for ways to connect and I love that it includes both a backup wire or a cigarette adapter option for power right in the box (most just have a power cord and you have to buy an adapter if you want the cigarette adapter). The cords are plenty long for about any kind of car (I needed an adapter for my boat, b

I have a school bus I am converting into a motorhome and I purchased this camera to install in place of my rear view mirror (since I can't use it through my walls.) I have not permanently mounted it yet, but tested it with daylight, in total darkness and tested how it responds to headlights (both low-beam and high-beam.)Full daylight provides a clear enough picture; not top of the line, but it definitely serves the purpose I got it for - to see behind me while driving.Full darkness is very grainy, so I won't be using it without reverse lights.Partial light (such as with backup/reverse lights o

I recently had the need to do a long distance drive in a 16' box truck without a passenger to act as a spotter for me. So I needed some way to be able to see what was behind me, and especially to my right while I was driving. I decided to try this camera as a temporary rear view. It worked perfectly! Due to the placement of the license plate it wasn't going to work to attach it to the license plate, so I used some A/V gaff tape (essentially high quality duct tape that removes without leaving residue) to tape the camera to the back of the truck, and used more gaff tape to tape the video cable a

works great, easy install, clear image on screen and great night vision

We were pleasantly surprised with this camera and monitor. Purchased it with a coupon which lowered the price to under fifty dollars. We tested it out prior to mounting and the image was clear and worked with fairly dim lighting. The camera automatically switches over to infrared mode (in black and white) when the lighting becomes too dark. The infrared lighting is sufficient, although the image wasn't quite as clear. Installation required moderate effort - finding a good path for the cable and drilling and sealing the necessary openings were the most difficult part. Using the provided 12V ada

I mounted this camera on the rear of our 24' toyhauler, just under the flood light at the very top of the ramp door. It sits about 9' off the ground. Installation was easy and I had no trouble running the wire where I wanted to. The wiring itself, though, is cheap and flaky. If you jiggle the connections, even with the locking rings securely fastened, the image on the screen will cut out. You have to get everything held in place just so, then tape the cable down or otherwise somehow fix it in place so it can't move. I got one replacement harness from the seller and that was a little better, bu