Best HDMI Switches and Splitters in 2026: 3, 4 and 5-Port Switchers Ranked by Owners

The UGREEN 5-in-1 is the switch for the household that has outgrown three inputs: a PS5, an Xbox, a Switch, a Roku and a laptop can all stay plugged in, and the remote reaches from 33 feet away. It carries the full HDMI 2.0 bandwidth of 18Gbps, which means 4K at 60Hz with HDR, and, unusually for a switch, variable refresh rate and the high refresh modes gaming monitors use, 1440p at 120Hz and 1080p at 240Hz. UGREEN is clear about the limits: keep the input and output cables under nine feet for 4K 60Hz, power it from USB, and do not expect ARC or eARC. About 6,000 owners rate it 4.3 stars, and reliability across five devices is the most common praise. If you need the inputs, it is the best-built five-port switch here; if you have three devices, the rank-one switch does the same job for less.

The Zettaguard ZW410 has a trick none of the other switches here can do: picture-in-picture, which shows a small live window of another input in the corner so you can see when a download finishes or a game lobby fills while you watch something else, then switch with a press. Beyond that it is a solid four-port switch with 4K 60Hz, full 4:4:4 colour for a PC desktop, HDCP 2.2 and lossless Dolby TrueHD and DTS-HD Master Audio pass-through for a receiver. About 5,200 owners rate it 4.2 stars, and most of them bought it for the four inputs and treat PIP as a bonus. It has been on sale a long time, which shows in a bigger box and a plainer remote than the newer picks, and the rating sits a touch below the three-port switch. If the preview window appeals, nothing else on the page offers it.

The Koopman 4-port is the plain four-input switch: 4K at 60Hz with HDR10, HDCP 2.2 and 18Gbps bandwidth through a metal box with every port at the back, so the cables run neatly off the shelf. It switches automatically to a device that powers on and comes with an IR remote for manual control, and it passes Dolby and DTS audio to the TV. It gives up the picture-in-picture of the Zettaguard and the VRR and high refresh support of the UGREEN, which is why it sits below both, but it is also simpler and cheaper than either and does what most four-device households need. About 3,500 owners rate it 4.2 stars, with consoles and streaming boxes the typical load. If you have four devices and no interest in extras, it is the sensible pick.

This pigtail switch is the budget three-port option: the output HDMI cable is built in, so you plug three devices into the box and the pigtail straight into the TV, and it switches automatically to whichever one powers on, with LEDs showing which is live. It is the cheapest switch here and about 5,900 owners have bought it. The catch is in the spec: it is a 4K 30Hz switch, not 4K 60Hz, so a PS5 or a 4K Fire TV Stick set to 4K 60 will stutter or negotiate down to 1080p, and HDR at 4K is off the table. That is fine for a 1080p TV, for older consoles and for a bedroom set, and it is why the rating sits at 4.0 stars rather than higher. There is no remote. If your TV is 4K and your devices output 4K 60Hz, spend a little more on the rank-one switch.

The bi-directional switch is the simplest device here and, for two devices, the best value: a small aluminium box with a button that toggles between two HDMI sources feeding one TV, or, turned around, sends one source to either of two screens, one at a time. It needs no power, passes 4K at 60Hz with HDCP 2.2 and 36-bit colour, and has two LEDs so you know which side is live. About 200 owners rate it 4.5 stars, the best score on the page, with a console and a streaming stick on a two-port TV the usual setup. Be clear about the splitter mode: it switches between two displays, it does not show the same picture on both at once; a true splitter does that and is a different product. There is no remote, so the box needs to sit within reach. For a bedroom TV with two devices it is hard to beat.

The NerdEthos 4-in-1 is a near twin of the Koopman at rank four: four inputs, 4K 60Hz with HDR10 and 36-bit colour, HDMI 2.0 with HDCP 2.2, automatic and manual switching, and a remote that the maker rates for 28 feet. It also has an LED for each port, which the Koopman lacks. The listing title calls it a splitter and the maker then spends a sentence explaining that it is a switch (four sources to one TV) and not a splitter (one source to four TVs), which trips up some buyers and accounts for a share of the critical reviews. About 1,100 owners rate it 4.2 stars. It ranks below the Koopman only on review volume; if it is in stock at a better price on the day, it is an equal choice for a four-device shelf.

The Philips Elite 4-device switch is for the buyer who wants a name they recognise on the box: four HDMI inputs, one output, a wireless remote and a button on the unit, sold under Philips’ accessories line with the support that comes with it. It is rated for 4K smart TVs and owners use it with cable boxes, consoles and streamers, and about 620 of them rate it 4.3 stars, slightly above the generic four-port switches. The weakness is the spec sheet: Philips does not publish the refresh rate, HDR support or HDCP version, so if you need to know that 4K 60Hz HDR will pass, the UGREEN, Koopman or NerdEthos tell you and this does not. It also costs more than those. If you prefer a mainstream brand and your sources are a cable box and a Blu-ray player, it is a safe, simple choice.